Product Introduction
IXPE foam is produced by compounding PE with some special padding
and foaming material,then cross linking by irradiation and foaming
which is considered as polymer material, expect the property of
XPE, the IXPE has better property than the XPE foam: Its surface is
much more
smooth, the obturator foramen is much more well-proportioned and
detailed, and its physical property is much better, too.
Specification
| CYG FOAM SPEC | 3BXPE | 5BXPE | 8BXPE | 10BXPE | 15BXPE | 20BXPE | 25BXPE | 30BXPE | 35BXPE | 40BXPE |
| Density | Kg/m3 | 300±40 | 200±30 | 125±15 | 100±10 | 66.7±8 | 50±6 | 40±4 | 33.3±3 | 28.6±3 | 26±3 |
| Lb/ft | 16.23~21.22 | 10.61~14.36 | 6.86~8.74 | 5.62~6.87 | 3.62-~4.68 | 2.88~.50 | 2.28~2.75 | 1.87~2.25 | 1.56~1.94 | 1.44~1.81 |
Hardness
Shore C | T＞3mm | 65～75 | 60～70 | 50～60 | 45～50 | 35～45 | 30～35 | 25～30 | 18～25 | 13～18 | 13～18 |
| T≤3mm | 60～70 | 55～65 | 45～55 | 40～45 | 30～40 | 25～30 | 20～25 | 15～20 | 15～20 | 15～20 |
| Water Absorption | % | ≤0.2 | ≤0.2 | ≤0.2 | ≤0.3 | ≤0.3 | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.5 | ≤0.5 |
| Thermal Conductivity | W/mk | ≤0.095 | ≤0.095 | ≤0.084 | ≤0.073 | ≤0.065 | ≤0.055 | ≤0.049 | ≤0.045 | ≤0.040 | ≤0.040 |
Application
Roof insulation and reflective
Pipe isolation
Wall heat preservation
Floor sound insultion,waterproof
Our services
Factory direct selling with lower price, sooner lead time, better
customized service.
Samples in stock can be arranged in one working day.
CYG TEFA offers the best solution for polyethylene foam production
based on long experience in the developing ,manufacturing PE
foam.All the service are focused on quality of products and
satisfied our customer.
FQA
1) What’s the order procedure?
First we discuss foam products details by email or TM.
Then we issue you a PI for your confirmation. You will be requested
to do prepaid full payment or deposit before we go into production.
After we get the deposit, we start to process the order. usually
takes 7-15days if we don’t have the items in stock.
Before production has been finished, we will contact you for
shipment details, and the balance payment. After payment has been
settled, we start to prepare the shipment for you.
2) How do you take care when your clients received defective foam
products?
Replacement. If there are some defective foam products, we usually
credit to our customer or replace in next shipment.
3) How do you check all PE foam on the production line?
We have spot inspection and finished product inspection of our foam
materials.We check the PE foam materials when they go into next
step production procedure.
4)What is PE foam?
Polyethylene foam is a strong, resilient closed-cell foam. Ideally
foam material suited as the material or part of a material required
in products requiring a shock absorbing, vibration dampening,
insulation, barrier or buoyancy component etc.
5) What's the application of insulation?
Our insulation products are widely used on roofing, external wall,
floor, HVAC pipe, transportation and any other places needing
insulation.
Low-density polyethylene foam has numerous applications because of
its many desirable properties including water-resistance, chemical
resistance, energy-absorbance, buoyancy and cushioning
characteristics. Compressive strength is greater in denser foams,
decreasing as density decreases. Low-density foams tend to exhibit
more compressive creep, meaning they become less thick over time,
than higher-density foams.
Production
