IXPE Foam Cross Linked Polyethylene Foam Sheet Density
Electronic cross-linked polyethylene foam also named Physical
crosslinked polyethyele foam, Irradiation crosslinked polyethylene
foam.Common abbreviations IXPE foam, IXLPE foam.It is made of
low-density polyethylene (LDPE), AC foaming agent and other powders
after being melted, mixed and extruded, and then foamed at high
temperature. IXPE has finer cells, smoother surface and better
mechanical properties than XPE.
Production process: compounding-extrusion-irradiation-foaming.
Note: IXPE foam can be made anti-static (we will talk about
anti-static IXPE later), but XPE cannot (theoretically it is
possible, but our company does not currently produce).
Polyethylene foam sheets xlpe foam is made of Low-Density PE
Polymer. Commonly made and used as an insulation & protective
material for various Industry applications.CYG foam is a strong,
resilient closed-cell foam and it has several outstanding physical
properties such as;
- Closed cell cross-linked polyethylene foam
- Excellent thermal insulation
- Lightweight
- Cost-effective
- Easy to fabricate
- Non-dusting
- Superb strength, and tear resistance
- High shock absorption
- Flexibility
Specification
- Foam Type: XPE FOAM / XLPE FOAM
|
| Property | Standard | Unit | Value |
| Density | - | Kg/m³ | 100.00 |
| Tensile Strength | Transverse | ISO-1798 | MPa | 0.89~0.90 |
| Longitudinal | 0.98~1.04 |
| Elongation | Transverse | ISO-1798 | % | 130.30~148.50 |
| Longitudinal | 130.00~158.20 |
| Tearing Strength | Transverse | ISO-8067
| Kn/m | 5.87~6.00 |
| Longitudinal | 6.22~6.54 |
| Compression 25% | ISO-3386-1 | kPa | 185.20 |
| Compression 40% | ISO-3386-1 | kPa | 252.40 |
| Compression 50% | ISO-3386-1 | kPa | 316.80 |
| Compression Set 25% 0.5H | ISO-1856 | % | 7.10 |
| Compression Set 25% 24H | ISO-1856 | % | 3.30 |
| Operating Temperature Range | Internal | °C | (-40,+80) |
| Water Absorption % Volume (Maximum) | Internal | % | 0.30 |
| Thermal Conductivity | JIS A1412-2 | W/mK | 0.073 |
| Shore - C | ASTM D2240 | °C | 55 |
| Flammability | FMVSS302 | mm/min | - |
Additional Information
● All tests were carried out in 23°C ± 2.
● Data represents typical values measured on a 8mm thick specimen
and should be considered as guidelines only.
Features
- Low density
- Good elasticity
- Good toughness
- Thermal insulation
- Energy saving
- Noise reduction
- Sound insulation
- Anti-condensation
- Corrosion and aging
- Convenient
Application
- Insulation on the dashboard, door panels, door armrests
- Lightweight product solution for automobile air duct
- Using for head pillow case by PIP filling&foaming technology
- Waterproof and soundproof car door material
- As damping and soundproofing foam products around the front of the
cockpit
- Excellent Roof / Head Lining thermal insulation solutions
- Automotive NVH products solutions
About CYG
CYG TEFA is the earliest PE foam manufacturing with scale
production in China since 2002.Mainly produce XPE FOAM,IXPE
FOAM,IXPP FOAM and ESD PRODUCT(Foam type: PE/EVA/PU/EPE/PP
Plastic).Annual production capacity is about 6000 tons.2 bases one
in Shen zhen and an other in Huzhou,with total 17 production
lines.CYG Management control system: Kingdee / OA / Oracle.CYG have
a professional team and technology.More than 30 R&D
staff.Through the great variety of our products we provide people
with a warm and quiet home and working environment.
- Management control system: Kingdee / OA / Oracle
11 employee
Investment rate: 4% to 10%
Responsible for : Improving available product / Technology
improving / New product development / New devices
IXPP project (three years: Proposal stage - Develop - Sampling -
Approved product- Small quantity supply for testing
FQA
1) Are the materials in your factory ECO-fiendly,any toxic?
A: All of our products and material are ECO-friendly,non-toxic, and
odorless material can be customized.
2) Are the material in your company fit for children?
A: Yes, we have non-toxic ,odorless ,grade A material that suitable
for children’s products, and can even meet food grade
3) Can you custom-made as requested?
A: Actually ,all the products made in my factory by far are
customized, my factory also offer OEM and ODM service.
4) Can you offer free samples?
A: Yes,we can offer free samples of small sizes (such as A4), but the
shipping costs is for the client.
5) What's the delivery time?
A: It takes usually 7-15 days for normal orders.
